Samsung M282x, M262x, SLM2625DXAC manual Machines with a display screen, Connecting in PBC mode

Wireless network setup

Machines with a display screen

Connecting in PBC mode

1Press and hold the (WPS) button on the control panel for more than 2 seconds.

The machine starts waiting for up to two minutes until you press the WPS (PBC) button on the access point (or wireless router).

2Press the WPS (PBC) button on the access point (or wireless router).

The messages are displayed on the display screen in the order below:

aConnecting: The machine is connecting to the access point (or wireless router).

bConnected: When the machine is successfully connected to the wireless network, the WPS LED light stays on.

cAP SSID: After completing the wireless network connection process, the AP’s SSID information appears on the display.

3Insert the supplied software CD into your CD-ROM drive, and follow the instructions in the window to set up the wireless network.

Connecting in PIN mode

1Press and hold the (WPS) button on the control panel for more than 2 seconds.

2The eight-digit PIN appears on the display.

You need to enter the eight-digit PIN within two minutes on the computer that is connected to the access point (or wireless router).

The messages are displayed on the display screen in the order below:

aConnecting: The machine is connecting to the wireless network.

bConnected: When the machine is successfully connected to the wireless network, the WPS LED light stays on.

cSSID Type: After completing the wireless network connection process, the AP’s SSID information is displayed on the LCD display.

3Insert the supplied software CD into your CD-ROM drive, and follow the instructions in the window to set up the wireless network.

2. Using a network-connected machine 120