Power levels, Using the deodorize feature

Power levels

You can choose among the power levels below.

Power level					Output

				MWO		GRILL
				MWO		GRILL

HIGH				800 W		-

MEDIUM HIGH				600 W		-

MEDIUM				450 W		-

MEDIUM LOW				300 W		-

DEFROST (	)			180 W		-

LOW/KEEP WARM				100 W		-

GRILL				-		1100 W

COMBI I (	)			600 W		1100 W
COMBI I (	)			600 W		1100 W

COMBI II (		)		450 W		1100 W
COMBI II (		)		450 W		1100 W

COMBI III (			)	300 W		1100 W
COMBI III (			)	300 W		1100 W

If you select higher power level, the cooking time must be decreased. If you select lower power level, the cooking time must be increased.

Using the deodorize feature

Use this feature after cooking odorous food or when there is a lot of smoke in the oven interior. First clean the oven interior.

Press the Deodorization () button after you have finished cleaning. you will hear 4 beeps.

The deodorization time has been specified as 5 minutes. It increases by 30 seconds whenever the Start/+30s button is pressed.

The maximum deodorization time is 15 minutes.

Adjusting the cooking time

You can increase the cooking time by pressing the Start/+30s button once for each 30 seconds to be added.

Press the Start/+30s button once for each 30 seconds to be added.

Stopping the cooking

You can stop cooking at any time to check the food.

1. To stop temporarily;
1) Open the door.
Result :	Cooking stops. To resume cooking,
	close the door and press Start/+30s (	) again.

2)Press the Stop/Energy Saving () button.

Result : Cooking stops. To resume cooking, press () again.

2.To stop completely;

Press the Stop/Energy Saving () button.


Result :	The cooking stops. If you wish to
Result :	The cooking stops. If you wish to
	cancel the cooking settings, press the
	cancel the cooking settings, press the
	Stop/Energy Saving (	) button again.

You can also cancel any setting before starting by simply pressing Stop/Energy Saving ().

Setting the energy save mode

The oven has an energy save mode. This facility saves electricity when the oven is not in use. Normal condition is standby mode and show clock when not using.