9.4 <
Troubleshooting>
5Release the blue strap, the rear cover stopper, and fully open the
rear cover, as shown.
6Unfold the duplex guide fully.
7While pushing the fuser lever to the right, open the fuser door.
1rear cover stopper
2rear cover
2
1
1duplex guide
1
1fuser lever
2fuser door
2
1
8Pull the jammed paper out.
If the jammed paper does not move when you pull, push the
pressure lever on each side down to loose the paper, and then
remove it.
9Return the lever, door, stopper, and guide to their original position.
10 Close the rear cover. Printing automatically resumes.
In the duplex unit areaIf the duplex unit is not inserted correctly, paper jam may occur. Make
sure that the duplex unit is inserted correctly.
Duplex jam 0
1Pull the duplex unit out of the printer.
1pressure lever
1
1duplex unit
1