10.2 <

Installing accessories>
6Push the DIMM straight into the DIMM slot until it snaps into place.
Make sure the latches fit over the notches located on either side of
the DIMM.
7Replace the control board cover.
8Reconnect the power cord and printer cable, and turn the printer
on.

Setting the memory in the PostScript printer

properties

After installing the memory DIMM, you need to select it in the printer
properties of the PostScript printer driver so that you can use it.
1Make sure that the PostScript printer driver is installed in your
computer. To installing the PostScript printer driver, you need to
select Custom and put a check mark on the PostScript printer
driver. See the Software Section.
2Click the Windows Start menu.
3For Windows 2000, select Settings and then Printers.
For Windows XP/2003, select Printers and Faxes.
For Windows Vista/2008, select Control Panel > Hardware and
Sound > Printers.
For Windows 7, select Control Panel > Hardware and Sound >
Devices and Printers.
For Windows Server 2008 R2, select Control Panel > Hardware >
Devices and Printers.
4Select the Samsung ML-3470 Series printer.
5Click the right mouse button on the printer icon and select
Properties.
6Select Device Settings tab.
7Select the amount of memory you installed from Printer Memory in
the Installable Option section.
8Click OK.
Installing a wireless network interface card
ML-3471ND is equipped with a network interface which allows you to
use your printer on a network. You can also purchase a wireless network
interface card to enable the use of the printer in wireless network
environments
For order information, see page 7.1.
Review the precautions on page 10.1 and then follow this procedure to
install the wireless network interface card in your printer.
1Turn the printer power off and unplug all cables from the printer.
2Grasp the control board cover and slide toward you to open it.
3Align the connector on the wireless network interface card with the
connector on the control board. Push the card firmly into the
connector on the control board until it is completely and securely in
place.
1control board cover
1
1connector
2wireless network
interface card
1
2