Wireless network setup 33
2. Using a network-connected machine
See "Setup using Windows" on page 38.
•With a USB cable: You can simply set up a wireless network
using the program on the supplied software CD. Only Windows
and Macintosh operating systems are supported (see "Setup
using Windows" on page 38 or "Setup using Macintosh" on page
45).
You can also install a wireless network in Samsung Easy
Printer Manager (Device Settings) or Printer Settings Utility
with a USB cable after installing the driver (Windows and
Macintosh operating systems are supported).
•With a network cable: You can set up a wireless network using
the SyncThru™ Web Service program (see "Using a network
cable" on page 51).

16

Using the WPS

Some models may not support this feature.
If your machine and an access point (or wireless router) support Wi-
Fi Protected Setup™ (WPS), you can easily configure the wireless
network settings on the control panel without a computer.
If you want to use the wireless network using the
infrastructure mode, make sure that the network cable is
disconnected from the machine. Using the WPS (PBC)
button or entering the PIN from the computer to connect to
the access point (or wireless router) varies depending on the
access point (or wireless router) you are using. Refer to the
user's guide of the access point (or wireless router) you are
using.

Items to prepare

• Check if the access point (or wireless router) supports Wi-Fi
Protected Setup™ (WPS).
• Check if your machine supports Wi-Fi Protected Setup™ (WPS).
• Networked computer (PIN mode only)

Choosing your type

The Push Button Configuration (PBC) method allows you to
connect your machine to a wireless network by pressing both the
WPS menu on the control panel of your machine and the WPS (PBC)
button on a Wi-Fi Protected Setup™ (WPS)-enabled access point (or
wireless router) respectively.