Glossary 133
BOOTP
Bootstrap Protocol. A network protocol used by a network client to
obtain its IP address automatically. This is usually done in the
bootstrap process of computers or operating systems running on
them. The BOOTP servers assign the IP address from a pool of
addresses to each client. BOOTP enables 'diskless workstation'
computers to obtain an IP address prior to loading any advanced
operating system.
CCD
Charge Coupled Device (CCD) is a hardware which enables the scan
job. CCD Locking mechanism is also used to hold the CCD module to
prevent any damage when you move the machine.
Collation
Collation is a process of printing a multiple-copy job in sets. When
collation is selected, the device prints an entire set before printing
additional copies.
Control Panel
A control panel is a flat, typically vertical, area where control or
monitoring instruments are displayed. They are typically found in
front of the machine.
Coverage
It is the printing term used for a toner usage measurement on
printing. For example, 5% coverage means that an A4 sided paper
has about 5% image or text on it. So, if the paper or original has
complicated images or lots of text on it, the coverage will be higher
and at the same time, a toner usage will be as much as the coverage.
CSV
Comma Separated Values (CSV). A type of file format, CSV is used to
exchange data between disparate applications. The file format, as it
is used in Microsoft Excel, has become a de facto standard
throughout the industry, even among non-Microsoft platforms.
DADF
A Duplex Automatic Document Feeder (DADF) is a scanning unit that
will automatically feed and turn over an original sheet of paper so
that the machine can scan on both sides of the paper.
Default
The value or setting that is in effect when taking a printer out of its
box state, reset, or initialized.