Wireless network setup 41
2. Using a network-connected machine
- Subnet Mask: 255.255.0.0 (Use the computer’s subnet
mask.)
- Gateway: 169.254.133.1
9 When the wireless network setting is completed, disconnect
the USB cable between the computer and machine. Click
Next.
10 The Wireless Network Setting Complete window appears.
Select Yes if you accept the current settings and continue the
setup procedure.
Select No if you want to return to the beginning screen.
Then, click Next.
11 Click Next when the Confirm Printer Connection window
appears.
12 Select the components to be installed. Click Next.
13 After selecting the components, you can also change the
machine name, set the machine to be shared on the network,
set the machine as the default machine, and change the port
name of each machine. Click Next.
14 After the installation is finished, a window asking you to print
a test page appears. If you want to print a test page, click Print
a test page.
Otherwise, just click Next and go to step 16.
15 If the test page prints out correctly, click Yes.
If not, click No to reprint it.
16 To register as a user of the machine in order to receive
information from Samsung, click On-line Registration.
17 Click Finish.
Ad hoc via USB cable
If you do not have an access point (AP), you may still connect the
machine wirelessly to your computer by setting up an ad-hoc
wireless network by following the simple steps below.
►Items to prepare
• Network-connected computer
• Software CD that was provided with your machine
• The machine installed with a wireless network interface
•USB cable