Samsung NV70H3340RS/EE manual Installing the Gliding Rack, Removing the Gliding Rack

Step 2

Check the four points expressed in the below picture.

Push the “Linker” until the “Linker” and “Gliding rail” are tightly coupled and check if four points are assembled completely.

Linker

Front

INSTALLING THE GLIDING RACK

Carefully insert gliding rack in the oven to install until the gliding rack reaches the back.

The gliding rack has 2 glide rails that allow you to extend the rack well out of the oven without touching the sides of the oven walls.

When using the gliding rack in the oven, be sure to pull on the “Linker” only to slide it in and out. If you grasp the “Base rack”, the entire gliding rack will be removed.

REMOVING THE GLIDING RACK

Please grasp both “Base rack” and “ Linker” and pull them to remove the gliding rack.

WARNING

Be very carefully removing gliding rack out of the oven. Hot meals, accessories and surfaces can burn you.

English - 16

Neo Lite_NV70H3340RS_EE_DG68-00591G-00_EN.indd 16 2014-06-09

�� 5:12:05