Configuring the Password
Setting the Supervisor Password
By configuring a supervisor password, you can restrict system access to authorized users only.
1.Select the Security menu in the System Setup. To enter System Setup, see “Starting System Setup” on page 54.
2.On the Set Supervisor Password item, press <Enter>.
3.Enter a password, press <Enter>,
4.When a message confirming the password configuration appears in the [Setup Notice] window, press <Enter>.
Setting the User Password
You can configure user passwords so that other users can use the system.
Before configuring a user password, a supervisor password must have been configured.
Users can start the system with their user password, but cannot enter into the System Setup.
Deactivating the supervisor password also deactivates the user password.
On the Set User Password item, press <Enter>, and complete step
Activating the Booting Password
Before activating the booting password, the supervisor password must have been configured.
Set the Password on boot option to [Enabled].
From now on, system booting will not proceed without the password.
56 Users Manual
