Q11 <Fn>+<F4 / LCD/CRT> keys does not operate.

AWhen you are playing video file such as a video CD, an MPEG file, or a DVD, when no external display is connected, or when you are using the extended desktop mode or full screen DOS mode, you cannot change display devices.

Q12 When I played a DVD or a video CD in dual display clone or extended desktop mode, actions such as changing the display setting or adjusting the volume operates slowly.

APlaying a DVD or a video CD requires additional data processing. In dual display clone or extended desktop mode, data volume involved in this process exceeds the volume the video chip can handle simultaneously, causing a problem.Change the display device to display through either one, the LCD or the external display device.

Q13 When the computer enters standby mode or hibernate mode, screen of a connected TV is broken for a short time.

AThis problem may occur in some wide screen TVs. After a short time, the TV turns off properly.

Q14 When I restarted the computer from hibernate mode, the screen is not displayed properly.

AThis problem may occur when the TV is set to primary display device, and the CRT to secondary. Change the display device differently. (Refer to ”Using External Display Devices” (p 60).)

Q15 When I connected and used a projector, the screen is broken for a short time.

AWhen you use DOS mode with some projectors, this problem may occur while changing the video mode. The screen is displayed properly after a short time.

Q16 When I set the extended desktop to display through both LCD and TV and restarted the computer, the setting is changed to dual display mode.

ASet to extended desktop again on [Graphics Controller Properties] dialog. (Refer to ”Using External Display Devices” (p 60).)

84 Users Manual

Page 97
Image 97
Samsung NX05PRC000/SEG, NX05RHZBTC/SUK manual Q11 Fn+F4 / LCD/CRT keys does not operate