Surface burner grates and assemblies
1.Turn off all controls and make sure all parts have cooled.
2.Lift off and remove the burner grates from the cooktop. Make
note of the burner sizes and locations of all the surface burners.
3.Lift off burner caps from top ofthe burner heads.
4.Lift the burner heads off the valve
manifolds and starter electrodes.
5.Clean all removable burner parts in warm, soapy water. Do not use
6.Rinse thoroughly and completely dry all parts before they are reassembled.
Starter electrodes are not removable and should only be wiped clean when the controls are in the OFF position.
7. Set all burner heads on top of the manifold valves in the same location you removed them from. The hole on the side of the burner heads goes over the electrodes. The burner heads are correctly installed when they are flat on the top of the manifold valves.
8.Set all burner caps on top of the burner heads.
These also need to be flat on top of the burner heads to ensure proper and safe operation.
ce ianl ppat in a m ngiyour i a
maintaining your appliance _55
02/01/2014 13:49:04