Samsung NX58F5500SW user manual troubleshooting, Problem, Possible Cause, Solution

	PROBLEM		POSSIBLE CAUSE		SOLUTION
Surface burners do not		The control knob is not set		Push in the control knob and
light.		properly.		turn it to the LITE position.
		The burner caps are not in place.		Clean the electrodes.
		The burner base is misaligned.		Put the burner cap on the burner
				head. Align the burner base.
Surface burner clicks		The control knob has been left in		After the burner lights, turn the
during operation.		the LITE position.		control knob to a desired setting.
				If the burner still clicks, contact a
				service technician.
The burners do not burn		Surface burner components and		See page 55.
evenly.		caps are not assembled correctly
		and level.
		Surface burners are dirty.		Clean surface burner
				components. (See pages 55
				and 56.)
Very large or yellow		Wrong orifice is assembled.		Contact your installer. Check the
surface burner flames.				burner orifice size and contact
				your installer if you have the
				wrong orifice. Check the LP gas
				conversion.
Surface burners light		The oven door lock is turned on.		The display will show the Lock
but oven burners do not				icon. Hold the oven door open
light.				and press the START/SET pad
				for 3 seconds. The oven will
				beep and the Lock icon will turn
				off.
		Gas Pressure Regulator shut off		Call a qualified service
		switch is in the ‘off position.		technician.
Display goes blank.		The electrical outlet Ground Fault		Replace fuse or reset circuit
		Interrupter (GFI or GFCI) has been		breaker.
		tripped and needs to be reset.
		Your digital control has been
		damaged.
Very large or yellow		The oven burner air adjustment		Call for a qualified service
oven burner flames.		shutters need to be adjusted.		technician.
		Gas supply is not properly		See the Installation Instructions
		connected or turned on.		that came with your range.
Food does not bake or		Wrong cooking mode is selected.		See page 27-28, 41.
roast properly in the
		The oven racks have not been		See page 30.
oven.
		positioned properly for the foods
		being cooked.
		Incorrect cookware or cookware		See page 24.
		of improper size being used.
		Oven thermostat needs adjustment.		See page 35.
		There is aluminum foil on racks		Remove foil.
		and/or oven bottom.
		Clock or timers not set correctly.		See pages 30 and 31.

68_ troubleshooting

140102_(IB)NX58F5300SS_AA_DG68-00509A-01_EN.indd 68

02/01/2014 13:49:09