Setting upYour PC Software (Windows only)

The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1Right click the mouse on the Windows Desktop, then click on Properties. The Display Properties will be displayed.

2Click on Settings tab, then set the Display Mode with reference to the Display Modes Table. You do not need to change the Colours settings.

3Click on Advanced. A new settings dialog box will be displayed.

4Click on the Monitor tab, then set the Screen refresh rate with reference to the Display Modes Table. Set the Vertical Frequency and Horizontal Frequency individually if you can do so instead of setting the Screen refresh rate.

5Click on OK to close the window, then Click on OK button to the Display Properties window. Automatic re-booting may commence at this moment.

Input Mode (PC)

Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported:

Video Signal

Resolution

Vertical frequency

Horizontal frequency

Vertical

Horizontal

(Dot X Line)

(Hz)

(kHz)

polarity

polarity

 

 

 

 

 

 

 

 

640 x 350

70.086

31.469

P

N

 

720 x 400

70.087

31.469

N

P

 

 

59.940

31.469

N

N

 

640 x 480

70.000

35.000

N/P

N/P

 

72.809

37.861

N

N

 

 

 

 

75.000

37.500

N

N

 

 

56.250

35.156

N/P

N/P

IBM PC / AT

 

60.317

37.879

P

P

800 x 600

70.000

43.750

N/P

N/P

Compatible

 

72.188

48.077

P

P

 

 

 

 

75.000

46.875

P

P

 

848 x 480

60.000

31.020

P

P

 

74.769

37.684

P

N

 

 

 

 

60.004

48.363

N

N

 

1024 x 768

70.069

56.476

N

N

 

72.000

57.672

N/P

N/P

 

 

 

 

75.029

60.023

P

P

(N: Negative / P: Positive)

The interlace mode is not supported.

The television might operate abnormally if a non-standard video format is selected.

480i/p, 576i/p, 720p, or 1080i is not available in PC mode.

English - 19

Page 19
Image 19
Samsung PLASMA DISPLAY Setting upYour PC Software Windows only, Input Mode PC, Video Signal Resolution Vertical frequency