33
13. Assemble and Disassemble
3. BELT
1) Remove thetop-cover.
2) Disassembleand assemble the belt.
3) Check the belt is located at center of the motor-pulley.
<When assemble the belt>
Hook thebelt on the motor pulley 1) and place it
around the pulley 2).
4. MOTOR
1) Lay down the washer on left side.
2) Remove the wire housing from the motor.
3) Remove the bolt fixing the motor with the box
drive on back side.
4) Remove the motor.
1
2
BELT
MOTOR
PULLEY
Motor Assemble Hole