12

7. General Error Function
When an error occurs, this function starts to keep generating error melody sounds and displays error indicatorsas
shownin the followings per corresponding error by blinking in 0.5sec interval untilthe error status is completely cleared out.
Inthis case, all the driving devices are turned off until the error is clearedout.
1.WATER SUPPLY ERROR
-Display shows such as fig. 1
-Water Supply Error occurs when water level frequency does not show
changesmore than 100Hz or water is not supplied
upto the water level presetting for 20 min or more at the time of initial
watersupply.
-Theerror status can be cleared by turning POWER S/W OFF and
resumingthe POWER ON initial status.
2.WATER DR AIN ERROR
-Display shows such as fig.2
-In c asethe water level frequency is 24.5KHz or less in the initial phase
ofUNB-detecting cycle.
-Water Drain error can be cleared by turning POWER S/W OFF and
resumingthe POWER ON initial status.
3.O VER-FLOW ERROR
-Display shows such as fig.3
-Over-Flow error occurs when the water level is in abnormal operation.
ItcanbeclearedbyturningPOWERS/WOFF.
Wateris drained prior to POWER S/W OFF and it is forced to be drained
for2 min if a frequency of more than 24.5 KHz is detected.
4.U NBALANCE ERROR
-Display shows such as fig4.
-Laundry load is unbalanced; loosen any tangled laundry.
-If only one item of clothing needs washing, such as a bathrobe or jeans,
thefinal spin result might be unsatisfactory and an error message will be
shownin the display panel such as fig 4..
-Unbalance error is cleared by POWER S/W OFF and by resuming the
POWER ON initial status.
5.WATERHEATERERROR
-Display shows such as fig.5 or fig.6
-In c asethe water temperature rises by 7∞C or more in 1 min. or by 2∞C
lessin 10 min after heating is started.
- It can be cleared by turning POWER S/W OFF.
6 DOOR OPEN ERROR
-Display shows such as fig.7
-Door Open error can be cleared by closing the door.
7.A SSíY PRESSURE S/W ERROR
*Generated Frequency Signal of WATER LEVEL(W/L) S/W (KHz)

Level Low Level High Level

Abnormal W/L Frequency 30.00 KHz 15.00 KHz

○:Lighton
●:Lightoff
fig. 1
fig. 2
fig. 3
fig. 4
fig. 5
fig. 6
fig. 7