Samsung RF323TEDBWW Using The Cold Water Dispenser, Controlling the fridge temperature, operating

will move sequentially from -8°F to 5°F (or from -23°C to -15°C).

Controlling the fridge temperature

The fridge temperature can be set between 34°F and 44°F (or between 1°C and 7°C) to suit your particular needs. Press the Fridge button repeatedly until the desired temperature is shown in the temperature display. The temperature will change by 1°F (or 1°C) with each press. See below.

Fahrenheit : 37°F ➞ 36°F ➞ 35°F ➞ 34°F ➞ 44°F

➞43°F ➞ 42°F ➞ 41°F ➞ 40°F ➞ 39°F ➞ 38°F

➞37°F.

Centigrade : 3°C ➞ 2°C ➞ 1°C ➞ 7°C ➞ 6°C ➞ 5°C ➞ 4°C ➞ 3°C.

The temperature control process for the Fridge works just like the Freezer process. Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin adjusting towards the newly set temperature. This will be reflected in the digital display.

Recommend Temp (Fridge) : 37°F (or 3°C )

-- The temperature of the Freezer, Fridge or Cool Select Pantry Zone may rise when you open the doors too frequently, or if a large amount of warm or hot food is placed inside.

-- This may cause the digital display to blink. Once the Freezer and Fridge temperature return to their normal set temperatures, the blinking will stop.

-- If the blinking continues, you may need to “reset” the Refrigerator. Try unplugging the appliance, wait for around 10 minutes and then plug the power cord back in.

-- If there is a communication error between the Display and Main Controller, the Convertible Display light may blink. If the blinking continues for a long period of time, please contact a Samsung Electronics Service Center.

USING THE COLD WATER DISPENSER

Push the appropriate ice type button to select what you want dispensed.

NO ICE	02operating
Select this if you want to
turn ice maker off

Using the ice lever ( 1 )

Push the Ice lever dispenser ( 1 )
gently with your glass. Ice will be	1
released from the dispenser.
You can choose the type of ice	2
by pushing the cubed or crushed

button first.

Using the Water lever ( 2 )

Push the Water lever dispenser ( 2 ) gently with your glass. Water will be released from the dispenser.

Even if you push the water and Ice lever simultaneously, the dispenser operates only the option you selected or pushed first.

Please wait 1 second before removing the cup after dispensing water to prevent spills. Do not pull out the lever dispenser after dispensing ice or water. It comes back automatically.

Using the Ice & Water Dispenser together

To get Ice and water, push the Ice lever ( 1 ) first for ice, then move your glass down and press the water dispenser lever ( 2 ) for water.

Maintaining the Ice Bucket

•To clean the ice bin/bucket, wash with a mild detergent, rinse well, and dry thoroughly it. Do not use harsh or abrasive cleaners or solvents.

•Ice is made in cubes. When you select “Crushed”, the ice maker grinds the ice cubes into crushed ice.

•When you select Cubed Ice after using the Crushed Ice mode, a small amount of residual crushed ice might be produced.

•The ice cubes generated by the rapid ice making process will look white, which indicates they are generated normally.

•As the ice maker in the refrigerator room makes ice cubes even faster, move the ice cubes from the refrigerator ice bin to the

operating _15

DA68-02603A-03.indb 15 13. 4. 25. �� 2:12