REVERSING THE DOOR SWING

- REVERSING THE HANDLE BAR [FRIDGE/FREEZER]

15. Detach the CAP SCREW

16. Switch the position of the

HANDLE with flat screwdriver and

CAP HOLE DOORs, pulling

disassemble the HANDLE BARs.

out and pushing them in.

-ASSEMBLY OF THE FREEZER DOOR

18.Exchange the positions of a bolt and 19. After switching the

the assy HINGE LOW after making a

position of the CAP HOLE

hole with phillips head driver on the

HINGE LOW, reassemble

left bottom side of the unit.

the COVER LEG FRONT.

21. Switch the position of the

22. Switch the position of the

STOPPER DOOR and the

GROMMET HINGE and

GROMMET HINGE as shown.

the CAP HINGE HOLE.

STOPPER

GROMMET

17.Reattach the HANDLE BARs on the other side of doors in reverse order.

20.Switch the position of the CAP HOLE HINGE MID and a screw.

23.Carefully put the Freezer door back on and assemble HINGE MID with 2 bolts and a screw.

- ASSEMBLY OF THE FRIDGE DOOR

25. Secure the ASSY HINGE UPP with 3 bolts as

24. Carefully put the Fridge door back on.

shown. Make sure the Fridge Door is firmly closed.

17

DA99-01220L.indb 17

2010.6.22 3:24:34

PM