LEVELLING THE
REFRIGERATOR
Now that the doors are back on the refrigerator, you will want to make sure the refrigerator is level so you can then make fi nal adjustments.
If the refrigerator is not level, it will not be possible to get the doors perfectly even.
The front of the refrigerator is also adjustable.
MAKING MINOR ADJUSTMENTS TO THE DOORS
Remember, a level refrigerator is necessary for getting the doors perfectly even.
If you need help, review the previous section on levelling the refrigerator.
When the door of the freezer is higher than the fridge
When the Freezer door is lower than the fridge
Insert a fl
Leg
Screw Driver
When the Freezer door is higher than the fridge
Insert a fl
Leg 
Screw Driver
Refer to the next section for the best way to make very minor adjustments to the doors.
10_ setting up
Adjustment part
In the process for adjusting both the doors is the | |||
same. Open the doors and adjust them, one at a | |||
time, as follows: |
|
| |
1. Unscrew the | 3 | Wrench | |
nut 1 from the | |||
| 2 Bolt | ||
lower hinge until it |
| ||
reaches the upper | 1 | Nut | |
end of the bolt 2 . |
|
| |
When you |
|
| |
release the nut 1 | , make sure that you use | ||
the Allen wrench provided 3 to loosen the bolt 2 in a
1with your fi ngers.
2.Adjust the
height difference | 3 | Wrench |
between the doors |
| |
by turning the | 2 | Bolt |
|
| |
bolt 2 clockwise |
| |
or counter |
| |
clockwise | . |
|
When you turn clockwise 
, the door will move up.
3.After adjusting the
doors, turn the | 3 | Wrench | |
nut 1 clockwise | |||
| 2 Bolt | ||
until it |
| ||
1 |
| ||
reaches the lower | Nut | ||
end of the bolt, |
|
| |
then tighten the |
|
| |
bolt again with the wrench 3 | to fix the nut in | ||
place 1 . |
|
| |
If you do not secure the nut fi rmly, the bolt may release.
2014. 7. 19. 8:41 |
