Installation
⑤After hooking the safety cable on the hole of pipe [1], attach the upper housing to wall mount bracket by turning it at least seven turns [2]. To fi x the upper body orientation, turn the handle of double nuts to clockwise tightly [3].
⑦Plug the connector of cable from junction box into properly. After checking the orientation of one touch connector in the upper housing, press the PTZ mechanism into hook in the upper housing.
⑥Open the dome cover to install the PTZ camera mechanism. Care must be taken dome cover is hung by internal safety cable properly. Plug fan/ heater cables into the connectors in the housing.
ENG |
⑧To lock the PTZ mechanism to the upper housing, press the two black handles till it sounds snap.
G
English – 11
