Samsung SCC-C7478P manual Installation Using Mount Bracket, RS-485 Termination Resistor

Installation

❖RS-485 Termination Resistor

ON ON

1 2 3 4 5 6 7 8

•Pin 8 is used for ON/OFF of RS-485 Termination. Normally, it must be OFF state. Especially when you have trouble with long Daisy chain style connection, turn ON this termination switch of last camera.

– Pin 8 RS-485 Termination Resistor (On/Off)

INSTALLATION USING MOUNT BRACKET

①Using the paper template, mark the holes on the wall.

③After locating the wall mount bracket on the anchor bolts properly. Tighten the nuts for anchor bolts



②After drilling the holes, fi x the four anchor bolts into the holes.

  

④Connect cables to terminal blocks and BNC in the inner box of junction box. See the cabling in the next section.

C onnector to the dom e cam era

Protocol,

Address DIP

RS-485

ALAR M

P O W ER

B N C

VIDEO

10 – 36x SMART DOME CAMERA