Call Functions
Making a Call
In Standby mode, enter the area code and phone
number, and press 
. The phone places the call to the entered phone number.
When entering the phone number, pressing allows you to access the following options:
Phonebook: allows you to save the number in your Phonebook. For further details on saving a number, see page 68.
Pause: inserts a pause. The numbers after a pause
will be dialled after a few seconds.
Press | until the desired one is highlighted, and |
press | . |
Correcting the Number
If you make a mistake while entering numbers, clear
the wrong number using 
and
To clear... | Then press... |
|
The last digit displayed | . |
|
The whole display | and hold down | for |
| more than one second. | |
Call Functions
Ending a Call
When you want to end your call, briefly press 
. The call time (length of call) displays with the name (if saved in Phonebook) and number of the call party.
If the number is not stored in your Phonebook, your
phone prompts you to save the number. Press 
to save the number. For further details on saving a number, see page 68. If you do nothing, the phone automatically returns to Standby mode after about ten seconds.
Or, close the phone to end a call.
Redialling Last Number
To redial the last number you called, press 
twice in Standby mode.
The phone stores the last 10 numbers dialled. To recall any of these numbers, proceed as follows:
1.If necessary, press 
to return to Standby mode.
2.Press 
to access the list of outgoing calls.
3.Press 
to scroll through the list until the required number is displayed.
4.Press 
to dial the displayed number.
22 | 23 |
