Getting Started
Using the Travel Charger
1.With the battery in position on the phone, connect the lead from the travel charger to the jack at the bottom of the phone.
2.Plug the power cord of the charger into a standard AC outlet.
3.When charging finished (the indicator on the connector of the charger turns green), disconnect the charger from the AC outlet and remove it from the phone by squeezing the two tabs on the lead(➀) and unplug the lead (➁).
➁ ➀
➀
Getting Started
Using the Desktop Charger
1.Plug the power cord of the desktop charger into a standard AC outlet. When the power is connected properly, the LEDs on the charger flicker briefly and then turn off.
2.Place the battery into the compartment of the charger. Select one of the following two options:
•Place the phone with the battery attached into the front compartment. The left LED on the charger turns on in red.
•Insert a single battery (alone, not attached to the phone) into the rear compartment. The right LED on the charger turns on in red.
16 | 17 |
