4-1 4-2

Changing the Settings

①Use the UP() and DOWN(❷) buttons to select the setting you want to change.
➁Press the ENTER( ) button to accept the choice.
➂Use the UP() and DOWN(❷) buttons to change the value.
➃Press the ENTER( ) button to accept the choice.
➄When you press the ENTER button, some setting fields are toggled.

Move to Parent Menu or Menu End

Press the MENU( ) button to move to the parent menu from the lower mode or end the
menu.

Entering the DVR MAIN MENU

Press the MENU ( ) button. Then the following screen should appear.

Selecting a Menu Item

Use the UP() and DOWN(❷) buttons to select the menu item you want. Ahighlighted cur-
sor should appear over the selected item. Next, press the ENTER( ) button to accept the
choice. Settings will be displayed on the left and their values will be displayed on the right.
1
Menu View
Note
Note
- Make sure that the VCR LED is off before pressing the MENU button. If the VCR
button had been pressed, the VCR MAIN MENU will be displayed.
- You can go into the menu only if the system is in Live Screen mode. If the system is
in Record or Play mode, you cannot go into the menu. To go into the menu, first
stop recording or playback.
DIGITALVIDEO RECORDER
MAIN MENU(DVR)
CLOCK/DISPLAY MODE SETUP
RECORD MODE SETUP
ALARM RECORD SETUP
TIMER RECORD SETUP
SYSTEM SETUP
COMMUNICATION SETUP
MOVE=[
/
❷
] SELECT=[ ] EXIT=[MENU]
MENU MENU