5-13
DIGITALVIDEO RECORDER
The ARCHIVE CHECK function allows you to check whether the images played back on
the DVR and transferred to the VCR are recorded correctly. The DVR plays back the signals
to be Archived for 5 seconds and send them to the VCR and the VCR records them.
After 5 seconds, the DVR stops playback and the VCR stops recording at the same time. The
VCR plays back 5 seconds of the most recently recorded data. ARCHIVE CHECK cannot
be performed during archiving; it is possible after archiving has stopped.
To perform ARCHIVE CHECK, in VCR mode, place the cursor at the ARCHIVE CHECK
of ARCHIVE MENU and press the ENTER ( ) button or press the ARC CHECK but-
ton on the remote control. The ARCHIVE CHECK will start and the following screen will
appear.
In the above screen, signals from the DVR are being recorded on the VCR for about 5 sec-
onds. After about 5 seconds, icon will appear at the top left corner of the screen and the
VCR will rewind to the start point of the most recently recorded images. Then, ❿icon will
appear and the VCR will play back the backed-up data.
5ARCHIVE CHECK
ARCHIVE CHECK
●
Note
Note
- The VCR play screen will not be output to S-VIDEO OUT.