4-64-5
DIGITALVIDEO RECORDER 2
Setting of Date, Time and Screen
The following illustrates the intial setting of the CLOCK/DISPLAYMODE SETUP menu.

DATE

Set the current date.

TIME

Time can be entered in the form of 24 hours.

DATE DISPLAYTYPE

There are 3 date forms to be displayed. You can set in a convenient manner to see.
[YYYY-MM-DD/DD-MM-YYYY/MM-DD-YYYY]

DATE & TIME DISPLAY

Set to ONto display the date and time on the screen, or set to OFF to not display them.
[ON/OFF]

DATE & TIME POSITION

Set the location on the screen where the date and time will be displayed. Set to LEFTto
display it on the top left of the screen, or set to RIGHTto display it on the top right of the
screen. [LEFT/RIGHT]

STATUS DISPLAY

Set to ONto display the system status, such as recording, system lock, to remaining HDD
capacity, and playback information when playing the recorded video; or set to OFFto not
display them. [ON/OFF]

STATUS POSITION

Set the location on the screen where the system status will be displayed. Set to LEFTto
display it on the top left of the screen, or set to RIGHTto display it on the top right of the
screen. [LEFT/RIGHT]
Caution
Caution
Be sure to set the date and time to the current date and time.
CLOCK/DISPLAYMODE SETUP RECORD MODE SETUP
ALARM RECORD SETUP TIMER RECORD SETUP
SYSTEM SETUP COMMUNICATION SETUP

Each menu item

Caution
Caution
Upon shipment from the factory, the values of the menu are set as follows.
CLOCK/DISPLAY MODE SETUP
DATE 2003-06-01 SUN
TIME 12:00:00
DATE DISPLAY TYPE YYYY-MM-DD
DATE & TIME DISPLAY ON
DATE & TIME POSITION RIGHT
STATUS DISPLAY ON
STATUS POSITION LEFT
MOVE=[///] SELECT=[ ] EXIT=[MENU]
RECORD MODE SETUP
DVR INPUT VIDEO-IN
AUDIO RECORD ON
PICTURE QUALITY HIGH
PICTURE RATE 30.00FPS
DISK END MODE OVERWRITE
DISK END BUZZER ON
RECORD TIME MARK ON
TIME MARK POSITION RIGHT
MOVE=[///] SELECT=[ ] EXIT=[MENU]
ALARM RECORD SETUP
ALARM SIGNAL DETECTION OFF
ALARM SIGNAL POLARITY N.O.
ALARM BUZZER ON
MAIN ALARM TIME 10 SECOND
PRE ALARM TIME LIMIT 2 SECOND
POST ALARM TIME LIMIT OFF
MAIN ALARM PICTURE RATE 30.0 FPS
MOTION DETECTION OFF
SET AREA & SENSITIVITY
MOVE=[///] SELECT=[ ] EXIT=[MENU]
TIMER RECORD SETUP
TIMER DAY START END FIELD RATE
OFF --- --:-- --:-- --.--
OFF --- --:-- --:-- --.--
OFF --- --:-- --:-- --.--
OFF --- --:-- --:-- --.--
OFF --- --:-- --:-- --.--
OFF --- --:-- --:-- --.--
OFF --- --:-- --:-- --.--
OFF --- --:-- --:-- --.--
OFF --- --:-- --:-- --.--
OFF --- --:-- --:-- --.--
OFF --- --:-- --:-- --.--
MOVE=[///] SELECT=[ ] EXIT=[MENU]
SYSTEM SETUP
PASSWORD ****
PASSWORD LOCK OFF
HDD ERASE OFF
FACTORY RESET OFF
MENU SCREEN DARK GRAY
LANGUAGE ENGLISH
IR REMOCON OFF
MULTIPLEXER WITHOUT
MULTIPLEXER SELECT SAMSUNG SDM-160
MOVE=[///] SELECT=[ ] EXIT=[MENU]
COMMUNICATION SETUP
BAUD RATE 115,200
NETWORK ACCESS ON
IP ADDRESS 0. 0. 0. 0
GATEWAY 0. 0. 0. 0
SUBNET MASK 0. 0. 0. 0
NETWORK USER ID ****
NETWORK USER PWD ****
PAN/TILT TYPE SCC-421
MOVE=[///] SELECT=[ ] EXIT=[MENU]
CLOCK/DISPLAY MODE SETUP
DATE 2003-06-01 SUN
TIME 12:00:00
DATE DISPLAY TYPE YYYY-MM-DD
DATE & TIME DISPLAY ON
DATE & TIME POSITION RIGHT
STATUS DISPLAY ON
STATUS POSITION LEFT
MOVE=[///] SELECT=[ ] EXIT=[MENU]