Samsung SCR-3000P Reservation Timer Setup

4-144-13

DIGITALVIDEO RECORDER 5

Reservation Timer Setup

The following illustrates the intial setting of the TIMER RECORD SETUPmenu.

●Timer recording enables the system to automatically record when you are not present so that

the recording is performed on the desired day at the desired time with the desired field rate.

First position the cursor at the line where TIMERrow is set to OFF to set it to ON, select

the desired day from the DAYrow, and enter the recording start and end time into START

and END row respectively. Also, set the field rate to be applied during recording in the

FIELD RATErow. If you set the DAYfrom SUN to SAT, the timer recording setting is

applied only to the corresponding days, but if you set it to DAILY, the timer recording

setting is applied to all days of the week. FIELD RATEcan also be set from 0.50 FPS up to

60 FPS (0.50 FPS to 50 FPS for the SCR-3000Pmodel). Once the timer recording is set, the

recording will be made on the corresponding day for the duration of entered time. Other

recording settings, except the field rate, follow the basic recording settings.

If an alarm or motion is detected during a timer recording, ALARM RECORD will be per-

formed.

If ALARM RECORD ends within the timer recording time, the timer recording will per-

formed again. If the END time of the timer recording time is equal to or less than the

STARTtime, the recording will stop at the END time of the day after the STARTdate. For

example, if DAYis set to MON, STARTis set to 12:00, and END is set to 11:00, the record-

ing will start at 12 on Monday and end at 11 on Tuesday.

When you turn on the system or if you have replaced the HDD, the timer recording will be

performed again if the current time falls within the scheduled time.

To force stop the recording, press and hold the STOP() button for 3 seconds. Then, the

recording will pause for 5 seconds. If no action is performed by the user for 5

seconds, the system determines whether the timer recording setup time is elapsed and

resumes the recording it not. To completely stop the recording, go into the menu within 5

seconds to set the TIMERitem of the corresponding line to OFF.

Timer recording can be set for up to 11 different times.

3) SIZE

Set the size of the area currently selected. Press the UP() button to increase the size

of the area vertically, or press the DOWN(❷) button to decrease the size of the area ver

tically.

Press the RIGHT(❿) button to increase the size of the area horizontally, or press the

LEFT(➛) button to decrease the size of the area horizontally. After setting the size, press

the ENTER( ) button to move the curstor so that you can set the MOVEitem.

4) MOVE

Set the position of the area currently selected. Press the UP() or DOWN(❷) button to

change the position of the area vertically, or press the LEFT(➛) or RIGHT(❿) button

to change the position of the area horizontally. After setting them all up, press the ENTER

( ) button to move the cursor to the AREAitem so that you can set each item for other

areas.

AREA=2 LEVEL=OFF [SIZE][MOVE]

AREA 2

AREA=2 LEVEL=MIDDLE [SIZE][MOVE]

TIMER RECORD SETUP

TIMER DAY START END FIELD RATE

OFF --- --:-- --:-- --.--

MOVE=[/❷/➛/❿] SELECT=[ ] EXIT=[MENU]