VII. Retrieval and Playback
7
6-5
DIGITALVIDEO RECORDER
4
Reservation Record
Reservation Record Setup
You can enter the day, time, and field rate for the timer recording in the TIMER RECORD
SETUPmenu so that the recording will be made on the set day for the set amount of time.
Reservation Record Cancel
If the system is not in the timer recording mode, in order to cancel the timer recording, set
the TIMER row of the line you want to cancel to OFF in one of the timer recording list set
in the TIMER RECORD SETUPmenu. However, if you want to force stop the timer
recording during the recording, press and hold the STOP() button for 3 seoncs. Then, the
recording will pause for 5 seconds. If no action is performed by the user for 5 seconds, the
system determines whether the timer recording setup time is elapsed and resumes the record-
ing it not. To completely stop the recording, go into the menu within 5 seconds to set the
TIMERitem of the corresponding line to OFF.
Caution
Caution
To stop the recording when you are recording by pressing the RECORD( )
button , shortly press the STOP() button. However, if you want to stop the record-
ing which isthe alarm or motion recording or timer recording, you should press and
hold the STOP() button for 3 seconds. This is to give the user an opportunity to
change themenu settings to completely stop the recording after pressing and holding
the STOP() button for 3 seconds to force stop the recording. Because if the system
is in the recording mode by alarm or motion detection, or in the timer recording
mode, there is no special method for the user to arbitrarily stop the recording and
the user cannot go into the menu during the recording, unless an alarm or motion is
not detected or the timer recording setting time is not elapsed.
REC