Labels
CAUTIONS:
•To avoid damaging the machine, use only labels recommended for laser printers.
•To prevent serious jams, always use the manual feeder to print labels and always use the rear output tray.
•Never print on the same sheet of labels more than once and never print on a partial sheet of labels.
When selecting labels, consider the quality of each component:
•Adhesives: The adhesive material should be stable at 208°C (406.4°F), the machine’s fusing temperature.
•Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets with spaces between the labels, causing serious jams.
•Curl: Prior to printing, labels must lie flat with no more than 13mm (5in.) of curl in any direction.
•Condition: Do not use labels with wrinkles, bubbles or other indications of separation.
Transparencies
Transparencies used in the machine must be able to withstand 165°C (329°F), the machine’s fusing temperature.
CAUTION: To avoid damaging the machine, use only transparencies recommended for use in laser printers.
A.12
