2 sided in 1 page Copying

You can copy a 2-sided document on one page of A4, or Letter -sized paper.

When you copy using this feature, the machine prints one side on the upper half of the paper and the other side on the lower half. This feature is helpful for copying a small-sized document, such as a name card.

If the original document is larger than the printable area, some portions may not be printed.

1Load the document to be copied on the document glass, and close the cover.

2Press Menu/Exit until "Special Copy" appears on the top line of the display.

3 Press the scroll button ( or ) until "2 Sides in 1 pg" displays on the bottom line.

4Press Start/Enter to save the selection.

5Customize the copy settings including number of copies, copy size, darkness and original type by using the control panel buttons. See “Setting Copy Options” on page 4.5.

6Press Start/Enter to begin copying.

Your machine begins scanning the front side.

7When "Set Backside" displays on the bottom line, open the document cover and flip the document over. Close the cover.

NOTE: If you press the Stop/Clear button or if no buttons are pressed for about 30 seconds, the machine cancels the copy job and returns to Standby Mode.

8Press Start/Enter again.

NOTE: You can adjust the copy size using the "Reduce/Enlarge" feature for making a 2-side Copying.

4.10COPYING

Page 89
Image 89
Samsung SCX-4100 manual Sided in 1 page Copying