Wireless network setup 32
2. Using a network-connected machine
•With a USB cable: You can simply set up a wireless network
using the program on the supplied software CD. Only Windows
and Macintosh operating systems are supported (see "Setup
using Windows" on page 34 or "Setup using Macintosh" on page
42).
You can also install a wireless network in Printer Settings
Utility with a USB cable after installing the driver (Windows
and Macintosh operating systems are supported).
•With a network cable: You can set up a wireless network using
the SyncThru™ Web Service program (see "Using a network
cable" on page 48).
15
Using the menu button
Before starting, you will need to know the network name (SSID) of
your wireless network and the network key if it is encrypted. This
information was set when the access point (or wireless router) was
installed. If you do not know about your wireless environment,
please ask the person who set up your network.
After completing the wireless network connection, you need
to install a machine driver to print from an application (see
"Installing driver over the network" on page 16).
1Select (Menu) > Network > OK > Wireless > OK > WLAN
Settings > OK on the control panel.
2 Press the OK to select the setup method you want.
•Wizard: The wireless network interface card in your
machine searches for wireless networks in the area and
shows the results.
•Custom: You can configure the wireless settings according
to your needs.
Wizard mode
1The wireless network interface card on your machine searches
for wireless networks in the area and shows the results.
2 Press Search List > OK > select the network > OK.
You can select a network using SSID.