Basic faxing 78
2. Menu overview and basic setup
3 Adjust the resolution and the darkness to suit your fax needs
(see "Adjusting the document settings" on page 79).
4 Enter the destination fax number.
5 Press Start on the control panel. The machine starts to scan
and send the fax to the destinations.
• If you want to send a fax directly from your computer, use
Samsung Network PC Fax (see Advanced Guide).
• When you want to cancel a fax job, press (Stop/Clear)
before the machine starts transmission.
• If you used the scanner glass, the machine shows the
message asking to place another page.
Sending a fax manually
Perform the following to send a fax using On Hook Dial on the
cont rol pan el. If y our mac hin e is an S CX -48 33H D or SCX -56 37H R, y ou
can send a fax using the handset.
1Place a single document face down on the document glass, or
load the documents face up into the document feeder (see
"Loading originals" on page 61 ).
2 Select (fax) on the control panel.
Or select Fax > On Hook Dial > (settings) on the touch
screen.
3 Adjust the resolution and the darkness to suit your fax needs
(see "Adjusting the document settings" on page 79).
4 Press On Hook Dial on the control panel or lift the handset.
5 Enter a fax number using the number keypad on the control
panel.
6 Press Start on the control panel when you hear a high-pitched
fax signal from the remote fax machine.
Sending a fax to multiple destinations
You can use the Multiple Send feature, which allows you to send a fax
to multiple locations. Originals are automatically stored in memory
and sent to a remote station. After transmission, the originals are
automatically erased from memory.
1Place a single document face down on the document glass, or
load the documents face up into the document feeder (see
"Loading originals" on page 61 ).
2 Select (fax) on the control panel.