Digital Multiplexer

3. Connecting to TIME LAPSE VCR

When connecting the unit to the TIME LAPSE VCR, set “TLV” in “REC TYPE” after selecting “1.REC OUT SET” of SETUP MENU.

1.Connect a S-JACK cable to the VTI terminal on the Unit’s Rear Panel and to the REC TRIG OUT terminal on the VCR.

2.Connect a S-JACK cable to the ‘G’ terminal on the Unit’s Rear Panel and to the ‘G’ terminal on the VCR.

3.Connect a cable to the VCR IN terminal on the Unit’s Rear Panel and to the VCR OUT terminal on the VCR. Likewise, connect a cable to the VCR IN terminal on the Unit’s Rear Panel and to the VCR OUT terminal on the VCR.

CAUTIONS

Depending on the kinds of TIME LAPSE VCR, the name of REC TRIGGER OUT terminal may be different, so be sure to connect after checking its name.

ENGLISH

3-2