¥ Flash Time | Samsung SF-5800P specification

With the DRPD feature active, ÔDRPDÕ appears in the display and the previously set reception mode is ignored. If you turn DRPD off, the machine returns to any previously set reception mode.

Notes:

¥DRPD must be set up again if you re-assign your fax number, or connect the machine to another telephone line.

¥After DRPD has been set up, call your fax number again to verify that the machine answers with a fax tone, then have a call placed to a different number assigned to that same line to be sure the call is forwarded to the extension telephone or answering machine plugged into the EXT.LINE jack.

¥SEND FROM MEMORY ÑIf you are annoyed that you have to wait until documents in the feeder are sent out when you try to send or reserve another fax, turn this feature on. This feature enables all transmission documents are automatically scanned into memory before transmission.

Press 1 to turn this feature on. Press 2 to turn this feature off.

¥LOCAL IDÑThis feature allows the machine to automatically print the page number, and the date and time of the reception at the bottom of each page of a received document.

Press 1 to turn this feature on. Press 2 to turn this feature off.

¥PRIORITY TERM (SF-5800P Only) ÑWhen you want to print a PC document while the machine prints a received fax on the recording paper, you can interrupt the printing and print the PC document. Press the Print Priority button to enable the feature. The interrupted fax data will be stored in memory. To disable, press the Print Priority button again.

You can set your machine to turn the feature off automatically if there is no further data printed within 30 minutes or 8 hours after PC printing.

Press 1 to select 8 hours. The machine turns off automatically 8 hours after PC printing is completed.

Press 2 to select 30 minutes. The machine turns off automacally 30 minutes after PC Printing is completed.

¥CLOCK MODEÑThis feature is to select the time format.

Press 1 to select 12 hour format. Press 2 to select 24 hour format.

¥FLASH TIME

Press 1 to select 100ms. Press 2 to select 280ms. Press 3 to select 600ms.

2.40 Other Functions

Image 72

Samsung SF-5800P manual ¥ Flash Time

Contents

SF-5800/SF-5800P Electronics Trademarks Contents Operation Iii Page Troubleshooting Important Safety Information Getting Started Set Up Your Machine Unpacking Control Locations and Functions Front View Rear View Setting Up Your Machine Choosing a LocationDocument Tray Document Exit Tray Printer Exit Tray Telephone Line AC Power Cord Extension Phone Printer Cable SF-5800P only Installing the Image Cartridge Set Up Your Machine Using the Automatic Paper Feeder Loading PaperPrepare the print material for loading Place the print side facing you Paper guide Using the Manual Feeder Paper Guidelines System Setup Ringer VolumeHome Resolution and Home Contrast Press Ã or ¨ repeatedly until you find the desired mode Sound Control Remote Diagnosis ProtectionPress Stop Econo Mode Setting Select LanguagePress Enter Press ¹ or ON, or 2 to set OFF Adjusting Speaker Volume Setting the Date and Time Enter the correct date and time using the number keypad Setting the System ID Your Number and Name Press Enter when the name in the display is correct Set Up Your Machine Operation Using the Control Panel SF-5800PSF-5800 Resolution Using the Number Keypad Entering Alphanumeric Characters Keypad Character Assignments Entering Numbers Editing Numbers or NameInserting Pause Sending a Fax Preparing Documents for Faxing or Copying Setting Document Resolution and Contrast ResolutionContrast Loading Document Canceling Transmission Sending a Fax AutomaticallyConfirming Transmission Automatic Redial Delayed Transmission Voice RequestSending a Voice Request Answering a Voice Request Enter the time by using the number keypad, then press Enter Another FAX Number ? Memory Transmission Broadcasting Priority Transmission Canceling a Standby Operation Adding Documents To a Standby Operation Receiving a Fax Receiving a Fax Receiving Automatically in FAX Mode Receiving Manually in TEL Mode Receiving Automatically in ANS/FAX ModePress Rcv.Mode until the display shows ÔANS/FAX.Õ Distinctive Ring Pattern Detection Drpd Option What is Polling? PollingBeing Polled By a Remote Machine Adding Documents To the Job to be polled Polling One or More Remote Machines If not, the machine dials the remote machine immediately Making a Copy Making a Copy To set copy options Automatic Dialing One-Touch DialingStoring a Number for One-Touch Dialing Sending a Fax Using a One-Touch Number Using Address LabelIf you donÕt want to assign a name, skip this step Sending a Fax Using a Speed Number Speed DialingStoring a Number for Speed Dialing Group Dialing for Multi-Address Transmission Storing One-Touch or Speed Dial Numbers for Group Dialing Sending a Fax Using Group Dialing Multi-Address Transmission Storing a Group into a One-Touch Button Searching for a Number in Memory Searching Sequentially through MemorySearching for a Particular First Letter Using Function Buttons Other FunctionsRedial Recall Chain DiallingStatus Printing Reports Help List Setting an Option User OptionsSelectable Options Operation Original Operation ¥ Flash Time Maintenance Cleaning DrumAdjust Shading Press Menu, and Maintenance on the one-touch keypad Troubleshooting Troubleshooting Clearing JamsDocument Jams While Sending a Fax Troubleshooting Paper Jams While the Machine is Printing If Jammed in the Printer Output Area Tips for Avoiding Paper Jams LCD Error Messages Display Meaning Solution NO. not Assigned Fixing Problems Symptom Cause and Solution Troubleshooting Maintenance Clearing Memory Cleaning the Document Scanner Maintenance Managing Image Cartridge Expected Cartridge LifeReplacing Image Cartridge To replace the image cartridge Close the cover firmly Memo Appendix Appendix FCC RegulationsCanadian Radio Interference Regulations EC Declaration of Conformity Laser Safety Statement Safety Information Product Safety Power Saver Replacing the fitted plug Specifications MH/MR/MMR