Samsung SF-5800P manual Memory Transmission Broadcasting

Memory Transmission (Broadcasting)

With Memory Transmission, documents are automatically stored in memory and sent to a remote station. Use this feature to send your documents to multiple locations. After sending, the documents are automatically erased from memory.

1.Load the document face down. If necessary, adjust Resolution, or

Contrast. For details, see page 2.8.

2.Press Menu, then press Memory TX on the one-touch keypad.

3.Enter the number of the remote machine, then press Enter.

To enter the number, you can also press a one-touch button including group dial button. Otherwise, press Speed/Status, enter a 2-digit speed dial number, then press Enter. The stored number (and name) appears in the display. Press Enter to confirm the number.

4.The display asks you to enter another fax number to send the document to another location.

ANOTHER

FAX NUMBER ?

Note: The machine displays the ÔANOTHER FAX NUMBER?Õ message repeatedly, each time you enter a fax number using manual dialing, One-Touch, 2-digit Speed Dialing, or Group Dialing. If you already used a group number at step 3, you cannot use another group number any more. You can use only one group number at this transmission job.

If you have used this multi-address transmission feature in other operation(s) currently registered in memory, the machine does not display ÔANOTHER FAX NUMBER?Õ.

5.If you want to send to more than one location, press Enter and enter another fax number using the number keypad, one-touch dial, or 2-digit speed dial number. Note that you cannot use Group dial number for another fax number.

The number appears in the display. Press Enter to confirm the number.

Or

To send to one location or when you complete the last fax number setting, press Stop.

6.The document will be scanned into memory before transmission. The display shows the memory capacity and the number of pages, then the machine begins sending the document.

2.14 Sending a Fax