Turbo Chef Technologies 2020 manual Initiating a Burn-In Test, Viewing the Serial Number

2 0 OVEN MODES

Initiating a Burn-In Test

NOTE: Burn-in tests are for manufacturing use only. DO NOT initiate a burn-in test unless expressly instructed by TurboChef.

To initiate a burn-in test, Press L2 (Figure 22, page 17) on screen 2 of the TEST MODE.

The burn-in test (Figure 28) runs the oven for 45 minutes to ensure correct oven operation. When the burn-in test completes, the burn-in complete screen (Figure 29) will appear. Press any key to send the oven to the COOLING DOWN MODE. If the burn-in test fails, the applicable error code will appear and the oven will return to the COOL-

ING DOWN or OVEN OFF MODE.

Viewing the Serial Number

The serial number is located at the bottom of screen 2 of the TEST MODE (Figure 22, page 17).

CAUTION: Write this number down before replacing the I/O control board. Replacing the I/O control board will erase this number from the oven’s memory.

If replacing a control board, see page 19 for re- entering the serial number.

Erasing Oven Settings

To erase oven settings, press L3 (Figure 22, page

17)on screen 2 of the TEST MODE to access the erase screen (Figure 30). From the erase screen,

-Press L1 to erase all menu, belt, and configuration settings.

-Press L2 to clear the fault counters.

-Press L3 to clear the operational hours.

The oven will ask you to confirm the action (Figure 31 shows the confirm clear faults screen); press R3 to confirm or the back/off key to cancel.

CAUTION: Settings, fault counts, and hours cannot be retrieved once the erase option is confirmed.

L1	BREAKFAST	TOP AIR 80 %		R1	L1
		Burn-In in Progress
L2	BELT F	COOKING	SET	R2	L2
	5:00	OVEN TCC = 475F	475F

Time Left = 42:37

ERASE MENUS/BELTS/CONFIGS

CLEAR FAULTS

R1

R2

L3	BELT R			R3	L3	CLEAR HOURS	R3
	3:20	100%	BTM AIR 100 %
Figure 28: Burn-In Test Screen					Figure 30: Erase Screen
L1				R1	L1		R1
L2		BURN-IN COMPLETE		R2	L2	CLEAR FAULTS?	R2
		OVEN TCC = 475F
L3		PRESS ANY KEY TO CONTINUE		R3	L3	Continue?	R3

Figure 29: Burn-In Complete Screen Figure 31: Confirm Clear Fault Counts Screen