Turbo Chef Technologies 2020 manual Editing a Cooking Profile, Changing a Cooking Profile Name

1 2 S TA N DARD OVEN OPERATION

Editing a Cooking Profile Changing a Cooking Profile Name

To edit a cooking profile, the oven must be in the COOKING MODE, and the full edit or flex option must be enabled for each option you want to edit. For more information on selecting between full edit, rigid, and flex options for each editable setting, see Edit Modes Select Screen on page 16.

When the rigid option is enabled for a given setting, the soft key adjacent to that setting (Figure 10) is disabled and no menu editing is allowed.

When the full edit option is enabled for a given setting, that setting is fully customizable and changes are saved once the oven returns to the OVEN

OFF or COOLING DOWN MODE.

When the flex option is enabled for a given setting, that setting is customizable within flex option limitations (as described in the following sections), and changes will reset when the oven returns to the

OVEN OFF or COOLING DOWN MODE. NOTE: The

flex option does not apply to editing a profile name.

This section assumes that the full edit option is enabled (except where otherwise noted) and that a cooking profile and belt speed have been selected.

1.From the cooking screen (Figure 10), press L1 to access the name change screen (Figure 11).

2.Change the name of the cooking profile.

-The up key moves forward through the available characters. e.g. A,B,C…

-The down key moves backward through the available characters e.g. A,+,-, ,9,8…

-INS (L1) inserts a space.

-DEL (R1) deletes the selected character.

----> (R2) moves the cursor to the right.

-<--- (L2) moves the cursor to the left.

3.Press save (R3) to save the changes or cancel (L3) to cancel any changes.

L1

L2

L3

PROFILE 1		TOP AIR 80 %	R1	L1
BELT F	COOKING	SET	R2	L2
5:00		475F
BELT R			R3	L3
3:20	BTM AIR 100 %

INS			DEL
<---	[PROFILE 1	]	--->
CANCEL			SAVE

R1

R2

R3

Figure 10: Cooking Screen Figure 11: Name Change Screen