Cleaning the Document Scanner
To keep your machine working properly, occasionally clean the white roller, ADF rubber, and the scanning glass. If they are dirty, documents sent to another fax machine will not be clear.
Note: Do not turn the power off to clean the scanner, as documents stored in memory will be lost.
1. Open the control panel with hand.
2.Disassemble the white roller as follows:
Both ends of the white roller have plastic bushings that are snapped shut with small tabs on them. Pull the bushing slightly inward (A) , then rotate the bushing (B) until it reaches a slot. Then pull the roller upward.
B A
busing
3. Wipe the roller surface with a soft cloth dampened with water.
3 Troubleshooting
Maintenance 3.11