Samsung SF-5800P manual Recall, Chain Dialling, Status

Recall

Some special phone services require a switch-hook signal for proper operation. For example, if you have call waiting, you can put a call on hold and take a second call on the same line by pressing the switch-hook button. Pressing Recall performs the equivalent of a switch-hook operation.

1.When you are on the telephone and hear the call waiting signal, press Recall once. The first caller is on hold and you are speaking to the second caller.

2.Press Recall again to talk to the first caller again.

Note: If you do not have a special service that uses the switch-hook signal, donÕt press Recall during a call. If you do, you could disconnect the line.

Chain Dialling

When using special computer services, such as alternate long distance carriers, credit card calls, or bank-by-phone, you must dial the telephone number of the service and wait for the computer to answer before continuing. The length of time before the computer answers can vary, so using a pre-programmed pause after a service number is not advised.

However, you can store your ID number, for example, in one memory location and the rest of the information, such as your card number, in another memory location.

Dial the phone number of the special service first. Then, when the computer answers, dial the rest of the information, such as a long-distance number. We call this procedure Chain Dialling.

You can combine regular dialing using the dial keypad and/or One-Touch Dialling for a Chain Dialling

Note: You can not use 2-digit Speed Dialling, Group Dialling, and /or redial number for Chain Dialling.

Status

Your machine can perform more than one of the many functions at the same time. For example, you can simultaneously:

¥Receive a fax into memory while making a copy.

¥Store a fax document for later transmission while printing an incoming fax.

¥Print an incoming fax document while scanning a document to the PC. (SF-5800P only)

¥Receive a fax into memory while printing a PC document. (SF-5800P only)

¥Print a PC document while sending a fax. (SF-5800P only)

When the machine performs dual tasks, Press Speed/Status to toggle the display between the current operation and new operation.

2.34 Other Functions