English English
5-16
Screen Setup
SHR-4081N/PUSER’S MANUAL
5-15
●This is a window to adjust Brightness/Contrast/Color for the camera image of each
channel. Put the cursor on the channel that you want to adjust and set up
Brightness/Contrast/Color. Once selected, the channel appear in the PIParea on
the right. Press the or button to adjust the value from 0 to 100.
●If you select CH ✓, all the channel values will become the same as the finally
selected channel value.
●“Default” resets the current channel to the basis value of 50.
3
Monitoring●Event Monitoring
You are able to set to Off / 3sec / 5sec / 10sec / 20sec / 30sec / Continuous.
①Off : Event Monitoring does not operate to turn to the screen where an event
occurs.
➁3sec / 5sec / 10sec / 20sec / 30sec : For the period, the screen is seen before
the next screen appears.
➂Continuous : The Event Monitoring screen remains alive until you press the front
“Alarm” button to cancel the screen manually.
●OSG Display
①Date :
The date is displayed on the screen or not depending Date remains On or Off.
➁Time :
The time is displayed on the screen or not depending
Time
remains On or Off.
➂Title :
The title is displayed on the screen or not depending
Title
remains On or Off.
➃Status : Audio/Ptz is displayed on the screen or not depending Status remains
On or Off.
●Spot Out Channel
Spot Out channel is used to let one of two monitors monitor a channel, focusing on
it. Spot Out channel supplies two functions, continuous monitoring of only one
channel and Screen change to display all the channels one by one.
①Screen change setup ranges from CH1 to CH8.
➁Set to Screen change, Spot Out channels are displayed in turn.
➂Screen change Duration is as same as determined for Camera Configuration.
●Spot Out Event Monitor
Determines if event monitoring will be executed for Spot Out channels.
①Off : dose not event monitoring in Spot out channel.
➁3sec / 5sec / 10sec / 20sec / 30sec : Duration options on the screen before it
scrolls down.
➂Continuous : Once scrolled down, the screen remains displayed until you delete
“Alarm” LED in front manually.