SHR-4081N USER’S MANUAL
3
Record Schedule
4
Event Recording
7-3 7-4
●While “Continuous Recording” or “Both” is selected for Record Schedule in MENU,
Timer Recording automatically starts. Otherwise, Timer Recording remains
inactivated. During Timer Recording, Recording Icon appear on the screen. During
recording in HDD, HDD LED in front blinks.
●Alarm Detection Setup
Sensor State in Event Record Alarm of MENU shall be set to N.O (Normal Open)
or N.C (Normal Close)
●Motion Detection Setup
M.D State in Event Record Motion Detection of MENU shall be set to On.
●Video Loss Detection
Image Loss State in Event Record Image Loss of MENU shall be set to On.
●Event Record Mode Setup
When Event occurs, it designates recording type. In particular, depending on
Pre-Event Off or Post-Event Off, Pre-Event or Post-Event Recording is
disabled respectively.
English English
●During the event recording, the auto recording is operated when the event occurs.
In this case, the event recording is saved according to the related channel setup
within the event recording items(Resolution, Frame, Pre-alarm, Post-alarm) of
recording menu.
Note
Note
Even in case of an event, Event Recording will not start unless Event Recording or
Both is selected in Record Schedule.
W
Warning
arning
If you carry out the functions necessary to stop recording(Time Change, File Delete,
HDD Connect/Disconnect, etc.), recording will be paused.
W
Warning
arning
If you carry out the functions necessary to stop recording(Time Change, File Delete,
HDD Connect/Disconnect, etc.), recording will be paused.