Samsung SHR-4081N/P System Information and Setup, HDD/External Device Setup

English English

5-8

SHR-4081N/PUSER’S MANUAL

5-7

System Information and SetupHDD/External Device Setup

●Software Version : Displays the current version. Setup is not available.

●Broadcast Format :

Displays the current Format(NTSC/PAL). Setup is not available.

●Mac Address : 6 Byte hardware address. Setup is not available.

●Device Erase

Erases the data in the ATA/ IEEE1394 / USB / USB memory.

Check the box that you want to delete and press “OK”.

Data is undeletable during Backup.

●USB S/W Upgrade

When there is no device, USB S/W Upgrade is failed.

Note 1

Being a physical hard disk inside the SHR-4081N/Pmain body connected by an IDE cable, this

stores data.

[External HDD]

Being a physical hard disk connected with the port and terminal in the back of the

SHR-4081N/Pmain body, this stores data.

This can be used as Extended HDD or Backup HDD.

- Extended HDD : Supplements Internal HDD quantity. Connected, it takes the place of Internal

HDD.

- Backup HDD : Backs up the data recorded in the set.

Note 2

[ATA]

Usage : Internal HDD

This is a physical hard disk connected with SHR-4081N/Pthrough the IDE cable.

[USB]

Usage : External HDD (Extended HDD or Backup HDD)

Aphysical hard disk connected with the USB port in the back of the SHR-4081N/Pmain body

[IEEE1394]

Usage : External HDD (Extended HDD or Backup HDD)

Aphysical hard disk connected with the IEEE1394 port in the back of the SHR-4081N/Pmain

body

●HDD Information

Displays the number, quantity, and status of ATA, IEEE1394, and USB.

Setup is not available.

Status : Internal HDD, External HDD, Backup HDD

●External HDD setup

1. Backup/External

You are able to determine the usage of IEEE1394 and USB.

Not Defined ➝When the connected HDD usage is not defined.

Expressed in External or Backup.

No Device ➝When no HDD is connected. You are able to press right TAB after you

connect HDD.

External ➝When the connected HDD is set to External. It may used as a back

up HDD if you press the “Enter” button and turn to Backup.

Backup ➝When the connected HDD is set to Backup. It may used as an

External HDD if you press the “Enter” button and turn to External.

Caution

[HDD Erase]

Data will not be deleted in backup or recording process.

Please be sure to suspend backup or recording before you delete any data.

If the recording is in progress, stop the recording to delete a data.

[USB S/W Upgrade]

You may download the software for upgrade from CCTVPart of http://www.samsung.com.

If the USB memory to be upgraded is not in a format supported by the DVR set, the upgrade

cannot be done. In this case, please use “Remove Devices” from “System Information and

Settings” in Menu 5-7. There should be only one file for upgrade in the USB memory.

2. Hot Plug - Connect/Disconnect

You may connect or disconnect IEEE1394 Hard Disk while power is supplied to the

SHR-4081N/Pmain body.

①As for connecting, connect IEEE1394 Hard Disk with the SHR-4081N/Pmain

body and press “Connect”. Pressing “Connect” makes the SHR-4081N/P

main body recognize all connected IEEE1394 Hard Disks.

➁As for disconnecting, be sure to press “Disconnect” and detach IEEE1394

Hard Disk from the SHR-4081N/Pmain body safely.(Be sure to pause recording

or backup process.) Pressing “Disconnect” cancels and detaches all connected

IEEE1394 Hard Disk.

Note 3

[USB S/W upgrade]

1. You can download the data(tgz file) for upgrade from www.samsung.com, CCTVPart.

2. The USB memory should have only one tgz file for upgrade.

3. In case of other memory format than supported by SHR-4081 model, please delete the

memory and set it up according to the set format.