Samsung SHR-4081N/P Password

English English

5-4

Password

SHR-4081N/PUSER’S MANUAL

5-3

●Date Format

This supplies 3 formats, Year-Month-Date / Date-Month-Year / Month-Date-Year.

●Time Format

This supplies 2 formats, 24 Hour / 12 Hour(AM/PM).

●Language

After you select a language, OSD is expressed in the selected language.

The available languages are added in the list.

●DST(Daylight Saving Time)

DST sets the watch one hour faster than the local standard time.

This makes the system count for DST in DSTregions.

Being the DST setup date, the set goes one hour faster and starts rebooting.

Set to Off, DSTdoes not operate. Then, you are unable to enter the right date

menu. Set to On, you can set the start time on the left and the end time on the

right on the basis of ‘~’. DST is allowed to set Month/Date/Time only.

Year/Minute/Second remains inactivated.

●The Default Password is 4321.

●New Password

This is used to change the system password inside SHR-4081N/P. You are

allowed to create a password up to 8 digits. Press the “Enter” button and then a

channel button from 0 ~ 9 on your left to finish input. If you press the “Enter”

button after change, the system will automatically turn to “New Password Confirm”.

●New Password Confirm

This confirms a new password. You shall be obliged to input New Password in the

above row first. Without New Password input, New Password Confirm input has no

effect.

●Password Lock

Pressing the “Menu” button while it is set to On, you will be asked by a pop-up

window of the password. Pressing the “Menu” button while it is set to Off, you will

enter Menu Mode immediately, not being asked of the password.

●All Key Lock On

If you select this, the system will enter Live Mode immediately. If you press a

button in the front, the Password window will pop up. Succeeding in Password

input will be followed by Key Lock cancellation after such a message window pops up.

Note

[Date/Time Change]

Pressing “OK” after you change date and time, you will be asked by a pop-up

window if you really confirm the change. Here, press “Yes” to change the time.

Since Date/Time does not change in backup process, be sure to stop the

backup process before you change Date/Time.

Note

[When the DST is operated]

The proceeding backup is cancelled. Recording in progress will be suspended for a

moment until rebooting.

Note

[All Key Lock On]

If you select this, the system will enter Live Mode immediately and keys will be

locked.

Caution

[Date/Time Change]

If you restore Date/Time to the original value, the data recorded before the

restoration may be deleted. For example, if you restore 8 am to 7 am, all the data

recorded between the times will be deleted.

Caution

[When the DST is operated]

As the system goes one hour earlier, the data recorded since an hour ago will be

deleted. As DST activates at the preset time, you are recommended to take the

utmost care of preventing any trouble incurred by data deletion or rebooting.