●After you select a function, press Enter. Then the function will be checked and
start running.
●If you select other function while this function is in action, the previous function will
be unchecked and the current function will be checked.
●If you put P/T/Z/ in operation or enter Preset Setup or Camera Menu Setup Menu
while this function is in action, the function in action will be suspended and
unchecked.
●Restart of SHR-4081N/P System in action has no effect. The function continues its
duty and remains checked.
SHR-4081N/PUSER’S MANUAL
5
Preset View
6
Other View
6-7 6-8
●Preset setup allows your movement to a certain saved position of PTZ device.
●Press the VIEW button in front of SHR-4081N/P in Single Screen PTZ device
Control Mode to select Preset.
●Press the VIEW button in front of SHR-4081N/P in Single Screen PTZ device
Control Mode to supply PTZ device. This is a very special function.
English English
●Control the cursor until it reaches a Preset position number that you want to move
to and you can check the right movement through in PIP Screen on your right.
PTZ
TELE WIDE VIEW
PRESET
PTZ
TELE WIDE VIEW
PRESET
(For example, Samsung Protocol)
(For example, Samsung Protocol)
Preset Auto Pan Scan Pattern EXIT Preset Auto Pan Sequence Sort EXIT Preset Auto Scan Frame Scan Pattern EXIT
Samsung Pan. Pel.
Note
Note
Samsung, Pan., Pel.-P, or Pel.-D Protocol PTZ device supplies this function.
Samsung: Auto Pan / Scan / Pattern
Pan. : Auto Pan / Sequence / Sort
Pel.(P,D) : Auto Scan / Frame Scan / Pattern