Samsung SHR-4081N/P Transfer Protocol Settings

English English

5-30

SHR-4081N/PUSER’S MANUAL

5-29

Caution

IIn the ADSL connection mode, SmartViewer does not support Audio replay.

Caution

Be sure to set up IP/SubnetMask/Gateway/DNS to let Smart Viewer connect with the

main body of SHR-4081N/P.

Wrong IP/Gateway/SubnetMask/DNS may prevent Smart Viewer from being

connected to the main body of SHR-4081N/P.

Please call the network manager or ADSL company to get each setting value.

●Gateway

Determines Gateway Address in the SHR-4081N/Pmain body.

●Subnet Mask

Determines Subnet Mask Address in the SHR-4081N/Pmain body.

●DNS

Sets up DNS Address in the main body of SHR-4081N/P. The default of DNS is

168.126.63.1. Generally, you don’t have to alter the DNS default but you may be hard to

connect to the network sometimes if you use DHCPor ADSL. In this case, call the

network manager or ADSLcompany to set up a new DNS address.

●ADSLUser ID

If the main body of SHR-4081N/Pis connected with the ADSL(PPPoE) network, input

User ID subscribed to the ADSLcompany. You may input User ID with a Virtual

key-board as long as 40 digits irrespective of alphabets, numbers, or symbols.

●Password

If the main body of SHR-4081N/Pis connected to the ADSL(PPPoE) network, input the

user password subscribed to the ADSLcompany. You may input the password with a

Virtual keyboard as long as 40 digits irrespective of alphabets, numbers, or symbols.

Transfer Protocol Settings

●You may choose the protocol type, either TCPor UDP.

ADSLsetup in the IP setup page can be made only to TCP.

●Port(TCP) can be selected from 554 to 998, increasing by 4.

Once the first digit is chosen, the rest 3 digits will follow the first digit.

●Port(UDP) can be selected from 8000 to 9760, increasing by 160.

Once the front port is chosen, the rest ports will change accordingly.

●Unicast/Multicast has the default of Unicast and you may choose Multicast.

●

Multicast IP shall be set to Multicast from Multicast/Unicast to be activated and for IP

setup.

Sets up the D-Class IP address from 224.0.0.0 to 239.255.255.255.

●TTl shall be also set to Multicast from Multicast/Unicast to be activated and to

choose a value from 1-255. The default is 5.

●DDNS Site

- You may select the DDNS Site as Off, Samsung DDNS, dyndns.com, no-ip.com, or

changeip.com.

- If you select Off, the IPwill not be registered in DDNS.

- If you select Samsung DDNS, the IPwill be registered in the DDNS operated by

Samsung.

Select MAC Address as the Address Type in the Setup➝Site Setup ➝DVR regis

tration window of the SmartViewer, and enter the MAC Address of DVR

(SHR-4081N/P), then you can connect remotely using the Samsung DDNS.

- dyndns.com, no-ip.com, and changeip.com are free Public DDNS websites that a URL

can be allocated by registering a Dynamic IP.

Become a member of the desired website, register the URL, and then set up your

Host Name, User Name, and User Password.

Select URLas the Address Type in the Setup ➝Site Setup ➝DVR registration

window of SmartViewer, and enter the Host Name (URL) that is allocated by the

Public DDNS website, then you can connect remotely using the URL.

Note

If you set up the Public DDNS (dyndns.com, no-ip.com, or changeip.com), it will take

approximately 30-60 seconds for the IPaddress of the Host Name (URL) to be updated

in the DNS.