English English
5-18
●Monitor Out
You may not use both VGAOutput and Composite/S-Video Output at the same time.
Accordingly, the user shall choose either one.
①Composite :
The output will come out from the
“
Composite / S-Video Output
”
port.
➁VGA: Output comes out of the “VGA Out” port.
Any change from Composite to VGAor vice versa reboots the system
automatically.
●PB( Playback ) Channel Position
Designates the position of a channel to be played back in Play Back 9 Split Mode.
Right Down : Designates a location on the bottom right corner.
Center : Designates a location in the center.
●Multi-channel Seq.
The change of split screen is available to be set.
It can be set to Off ,3 Sec,5 Sec, 10 Sec, 20 Sec, 30 Sec.
SHR-4081N/PUSER’S MANUAL
5-17
Caution
Caution
[Monitor Out]
Set to Composite Output, VGAdoes not come out.
Set to VGA, Composite Output does not come out.
If you hold on to the MODE button in Live Mode and keep pressing the 0 button for
5 seconds, the status will change from VGAto COMPOSITE or vice versa
accompanying rebooting.
4
Record Mode

If you press the front “REC” button, the mode to be recorded will be determined.

☛For Event Recording Mode value setup, refer to 5-19. Event Record

Mode Setup Menu.

●Mode
On : Pressing the REC
button
starts recording the current channel.
Off : Even pressing the REC
button
does not affect current channel recording.
The default is set to “On”.
●Video Size
Determines the size of a screen to be recorded.
Full D1 : 720 x 480(NTSC) / 720 x 576(PAL) ➝Large(L)
Half D1 : 720 x 240(NTSC) / 720 x 288(PAL) ➝Normal(N)
CIF : 352 x 240(NTSC) / 352 x 288(PAL) ➝CIF(C)
Note
Note
[Video Output]
"Full D1" setup for the resolution is available from the recording sheet number of
7.5ips(NTSC)/6.25ips(PAL)
"Half D1" setup for the resolution is available from the recording sheet number of
15ips(NTSC)/12.5ips(PAL)
Resolution “CIF” can be set from Recording page number “30.”
●Recording Resolution
Selects the recording resolution. VH(Very High) / H(High) / S(Standard) / L(Low).
●Rate
Determines Frame Rate to be recorded. Frame Rate means the number of screen
recorded every second.
Set to 30ips(NTSC)/25ips(PAL), the system records too many screens per
second and play continues intermittently since recording is more detailed.
This is appropriate for concentrated monitoring zone setup.
Set to the one of 30ips / 15ips / 10ips / 7.5ips / 5ips / 3ips / 1ips (NTSC)
Set to the one of 25ips / 12.5ips / 8.33ips / 6.25ips / 5ips / 2.5ips / 1ips (PAL)
●Auto Deletion
Click [Off] button at the left bottom to select Off/On.
Select On to limit the search date by moving to the date selecting button.
Select Off not to limit the search date.
The date is limited from 1 to 99.
NTSC PAL