2. Motion Occurrence
The Motion option only becomes available when a camera with Motion features is connected.
1)When a Motion trigger is received, a warning buzzer sounds and the screen is divided into 9
| 02/06/01 | 12:30:01 |
|
| EVENT |
CH1 | CH2 | CH3 |
CH4 | CH5 | CH6 |
CH7 | CH8 | M 12345678 |
2)Press ENTER (in the middle of the Rotary Wheel) to replay the event in Event Replay mode. Up to 15 screens can be replayed centering on the time of the Motion occurrence. The duration of the replay is displayed in a graph.
Turn the Rotary Wheel during the Replay to forward or reverse the stored screens one by one.
Press ENTER to terminate the Event Replay. The Event Replay will continue until ENTER has been pressed.
| 02/06/01 | 12:30:01 | |
| 1 |
| EVENT |
| CH2 | CH3 | |
|
| ||
CH4 |
| CH5 | CH6 |
|
|
| MOTION |
|
|
| 02/06/01 |
CH7 |
| CH8 | 12:29:30 |
3)Motion occurrence information is stored in the “EVENT LIST”.
4)Alarm Out (HOT, COLD) signals are active during “ALARM HOLD TIME”.
5)Recording output continues in Normal mode until the Motion is cleared. The recording frequency of the corresponding channel increases.
6)Signal output continues as the Motion occurs and later clears.
