e-42
Chapter 7. Alarm, Motion, Loss and Door Bell 1. Alarm Occurrence
The Alarm becomes available only when an Alarm Box is connected.
1) When an Alarm trigger is received, a warning buzzer sounds and the screen is divided
into 9 Live-Mode sub-screens. The word “EVENT” appears on the screen and the Alarm
occurrence information is displayed at the right bottom of the screen.
2) Press ENTER (in the middle of the Rotary Wheel) to replay the event in Event Replay
mode. Up to 15 screens can be replayed centering on the time of the Alarm. The duration
of Replay is displayed in a graph.
Turn the Rotary Wheel during the Replay to forward or reverse the stored screens one by
one.
Press ENTER to terminate the Event Replay. The Event Replay will continue until
ENTER has been pressed.
3) Alarm occurrence information is stored in the “EVENT LIST”.
4) Alarm Out (HOT, COLD) signals are active during the “ALARM HOLD TIME. ”
• ALARM HOLD TIME : Time during which the Alarm function is carried on after the
Alarm is first detected. Alarm Hold Time is reset automatically when Event Replay is
turned on.
02/06/01 12:30:01 EVENT
CH1 CH2 CH3
CH4 CH5 CH6
CH7 CH8 A 12345678
02/06/01 12:30:01 EVENT
CH1 CH2 CH3
CH4 CH5 CH6
CH7 CH8
ALARM
02/06/01
12:29:30
1
1_SMO-210TP_E 10/18/02 5:19 PM Page e-42