Chapter 6. Recording
1. Recording in Time Lapse (or Normal) Mode
•Input signals transmitted from up to 8 cameras are switched to output signals every 1/30 sec to be recorded by the VCR.
•To record output signals, “RECORD DUTY” for that channel must be set at 1 or above (SETUP MENU → “4. SYSTEM SETTING” → “RECORD…” → “RECORD DUTY”).
•The TRIGGER OUT port of the VCR must be connected to the VIT port of this system.
•When trigger signals from the VCR stop for more than 10 sec, the Self Trigger mode is turned on to continue recording without the trigger from the VCR.
2.Alarm/Motion Channel Double-Recording
•This system
•It records the Alarm/Motion channels in between recording the output channels.
•The “VIDEO LOSS” channel is also subject to the Alarm/Motion Channel Double- Recording.
•Ex.) The ALARM is turned on at CH2. Then MOTION occurs at CH5.
CH2: Alarm Occurs
CH5: Motion Occurs
CH5: Motion Occurs
