Samsung SMX-C200RP/XSV Connecting A Power Source, Battery pack insertion/ejection, preparation

preparation

CONNECTING A POWER SOURCE

•Be sure to charge the battery pack before you start using your camcorder.

•Use the IA-BH130LBbattery pack only.

•The battery pack may be charged a little at the time of purchase.

Battery pack insertion/ejection

It is recommended you purchase one or more additional battery packs to allow continuous use of your camcorder.

[Battery pack release] switch

Inserting the battery pack

1.Slide and open the battery slot cover as shown in the diagram.

2.Insert the battery pack into the battery slot until it locks.

•Make sure that the SAMSUNG logo is facing left while the battery pack is placed as shown in the diagram.

3.Push the battery cover down until it meets the camcorder body, then slide it up to close.

Ejecting the battery pack

1.Slide and open the battery slot cover and push the Battery pack release switch.

•Gently push the battery pack release switch in the direction as shown in the diagram to eject the battery.

2.Pull the ejected battery out in the direction as shown in the diagram.

3.Push the battery cover down until it meets the camcorder body, then slide it up to close.

• Remove the battery pack separately from the camcorder while not in use.

14	•	It is recommended to prepare an additional battery pack for prolonged outdoor use.
	•	Contact your nearest Samsung Electronics Service Centre for purchasing additional battery packs.