Samsung SMX-C20RP/XSV Wind Cut, Digital Zoom, Press the MENU button Control button, Submenu items

Wind Cut

You can reduce wind noise when recording sound from the built-in microphone. If "Wind Cut : On" is set, the low-frequency components in the sound picked up by the microphone will be cut off during recording: This makes it easier to hear voice and sound during playback. Use Wind Cut when recording in windy places such as a beach.

1.Press the MENU button ￿ Control button (￿ / ￿) ￿

"Wind Cut."

2.Select the desired submenu item with the Control button (￿ / ￿) ￿ OK button.

STBY 0:00:00 [475Min]

Wind Cut

Off

On

3.Press the MENU button to exit the menu.

Exit

STBY 0:00:00 [475Min]

9999

Submenu items

•Off: Disables the function.

•On ( ): Minimises wind noise or other noise while recording.

When "Wind Cut" is "On", some low frequency sound is eliminated along with the sound of the wind.

Digital Zoom

You can select the maximum zoom level in case you want to zoom to a level greater than 10x (the default setting) during recording. Up to 10x zoom is performed optically, and after that, up to 1200X zoom is performed digitally. Note that the image quality decreases when you use the digital zoom.

1.Press the MENU button ￿ Control button (￿ / ￿) ￿

"Digital Zoom."

2.Select the desired submenu item with the Control button (￿ / ￿) ￿ OK button.

3.Press the MENU button to exit the menu.

Submenu items

•Off: Only optical zoom is available up to 10x.

•On: Digital zoom is available up to 1200x. Moving the zoom lever will display the digital zoom bar.

This right side of the bar shows the digital zooming zone.

The zooming zone appears when you move the zoom lever.

STBY 0:00:00 [475Min]

Digital Zoom

Off

On

Exit

STBY 0:00:00 [475Min]

9999

•	The image quality may deteriorate depending on how much you zoom in on the subject.	55
•	Maximum zooming may result in lower image quality.